Lexmark X746de - Front Door Assembly Removal

To Next Page

To Previous Page

4-92 Service Manual

7526

Go Back

Front door assembly removal

See the part number for the Front door assembly for the specific model you need on.

1. Remove the front access cover assembly. See “Front access cover assembly removal” on page 4-21.

2. Remove the LVPS. See “Low-voltage power supply (LVPS) removal” on page 4-115.

3. Disconnect the JTPS1 cable (A) from the system board.

4. Release the left and right front door assembly cable.

5. Release the cable springs (B) from the front door assembly.

Other manuals for Lexmark X746de