1-16 Service Manual
7526
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
• For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most
label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative
humidity between 40 and 60%.
• Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
• Store individual packages on a flat surface.
• Do not store anything on top of individual paper packages.
Tools required for service
Flat-blade screwdrivers, various sizes
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic short-blade
7/32 inch (5.5 mm) open-end wrench
4.0 mm Allen wrench (HCIT removal)
7.0 mm nut driver
Needlenose pliers
Diagonal side cutters
Spring hook
Feeler gauges
Analog or digital multimeter
Parallel wrap plug 1319128
Twinax/serial debug cable 1381963
Coax/serial debug cable 1381964
Flash light (optional)
Acronyms
ADF Automatic Document Feeder
BLDC Brushless DC Motor
BOR Black Only Retract
BUR Back Up Roll
CCyan
CCD Charge-Coupled Device
COD Color On Demand
CSU Customer Setup
DIMM Dual Inline Memory Module
DRAM Dynamic Random Access Memory
EDO Enhanced Data Out
EP Electrophotographic Process
EPROM Erasable Programmable Read-Only Memory
ESD Electrostatic Discharge
FB Flat Bed
FRU Field Replaceable Unit
GB Gigabyte
HCIT High-Capacity Input Tray
To Next Page
Loading...
