4-168 Service Manual
7526
Top access cover links removal
Links come two in a package and fit either the right or the left.
Lower links
1.
Open the top access cover.
2. Remove the side cover that corresponds to the link you need to replace. For example, if you are replacing
the right lower link, remove the right cover.
3. Disconnect the spring (A).
4. Remove the two screws (B).
5. Remove the link.
Upper links
1.
Open the top access cover.
2. Remove the two screws (A) on the link that you need to replace.
3. Remove the link.
To Next Page
Loading...
