3-2 Service Manual
7526
Diagnostics menu
Diagnostics menu structure
When the Diagnostics menu is entered, each item displays on the operator panel. When a diagnostic test is
selected from the main menu, a sub menu displays and each individual test displays in the order shown. Any
options that are referred to in the menus are displayed when the option is installed.
Available tests
The tests display on the operator panel in the order shown:
Registration
Top Margin See “Registration” on page 3-5.
Bottom Margin
Left Margin
Right Margin
Skew See “Skew” on page 3-5.
Quick Test See “Quick Test” on page 3-7.
ALIGNMENT MENU
Cyan See “Alignment Menu” on page 3-8.
Magenta
Yellow
Factory Scanner
Factory Manual A summary page for all the color alignment settings. Can be used in
place of alignment pages for each individual color.
MOTOR TESTS (order differs depending upon model)
Align Motor Test See “General motor tests procedures” on page 3-8.
Cart 1
Cart 2
Cart 3
CAM
COD
DUPLEX
MPF
Transfer Belt
Tray 1
PRINT TESTS
Tray 1 See “Input source tests” on page 3-11.
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed)
Multi-Purpose Feeder
Print Quality Pages See “Print quality test pages (Prt Quality Pgs)” on page 3-12.
To Next Page
Loading...
