1-2 Service Manual
7526
Media options
The Lexmark X748 MFP supports 550-sheet drawers, special media drawers, and the 2000-sheet high-capacity
input tray. The Lexmark X748 MFP supports up to four input options.
The options can include any combination of 550 sheet drawers and 550 sheet Specialty Media Drawers, with a
maximum of one 2000 sheet drawer (always at the lowest position.) A caster base is required with some
configurations. Including the base machine capacity of 650 sheets, the MFP supports up to 4,300 sheets.
The media options include:
• 550-Sheet Drawer—This optional input source installs beneath the printer, and it holds approximately 550
sheets of (20 lb.) paper.
• High Capacity Input Tray—This optional input source installs beneath the printer, and it holds
approximately 2000 sheets of (20 lb.) paper.
• Specialty Media Drawer—This optional input source installs beneath the printer, and it holds
approximately 550 sheets of (20 lb.) paper, or 85 standard envelopes.
Memory options
• Additional memory card—The memory options are 200 pin DDR2, SODIMM, and they are available at
256MB, 512MB, and 1GB sizes.
• Flash memory card—Flash Memory cards are available in 256MB.
• Hard disk—If larger storage is required, an optional hard disk is available.
Printer and scanner specifications
Dimensions
The following table contains the dimensions and weight for each of the respective printer models. This does not
include packaging.
5 Optional 550-sheet drawer (standard on X748dte)
6 Optional 550-sheet drawer
7 Optional 2,000-sheet high capacity feeder
8 Caster base
9 Standard 550-sheet drawer
10 Multipurpose feeder
Height Width Depth Weight
Basic printer (cartridges only) 787 mm
(31 in)
546 mm
(21.5 in)
622 mm
(24.5 in)
44kg
(96.8 lbs)
Printer with 550-sheet optional
drawer
909 mm
(35.8 in)
546 mm
(21.5 in)
622 mm
(24.5 in)
48.3 kg
(107 lbs)
Paper input options
550-sheet drawer 122 mm*
(4.8 in)
435 mm
(17.1 in)
545 mm
(21.4 in)
4.4 kg
(9.7 lbs)
Number Description
To Next Page
Loading...
