Diagnostic aids 3-37
7526
Examine the copy of the Quick Test and compare it to the original. Adjust the Left Margin and/or the Top
Margin to match the original.
6. Touch Submit.
Submitting changes… is displayed.
7. Place the original printout on the glass of the flatbed, and touch Copy Quick Test.
8. If the pages match, continue to step 9. If the pages do not match, repeat steps 4 through 7, until you are
satisfied.
9. Place the original in the ADF, and touch Copy Quick Test.
10. Examine the copy of the Quick Test and compare it to the original. If it does not match, continue. If it does
match, go to step 11. If it matches go to step 16.
11. Touch ADF Front.
Adjust the Left Margin and/or the Top Margin to match the original.
12. Touch Submit.
Submitting changes… is displayed.
13. If the pages match, continue to step 14. If the pages do not match, repeat steps 8 through 12, until you are
satisfied.
14. Place the original Quick Test in the ADF facedown, and touch Copy Quick Test.
15. Examine the copy of the Quick Test, and compare it to the original. If the pages match, you are done. If the
pages do not match, continue to the next step.
16. Touch ADF Back. (This setting only appears on duplex machines)
Adjust the Left Margin and/or the Top Margin to match the original.
17. Touch Submit.
Submitting changes… is displayed.
Touch Back at any time to return to the initial scanner manual registration screen without saving any changes.
Selection Effect
Left Margin • Decrease the value and move the margin to the left.
• Increase the value and move the margin to the right
Top Margin • Decrease the value to move the margin down
• Increase the value to move the margin upward.
Selection Effect
Horizontal Adjust • Decrease the value to move the margin to the left
• Increase the value to move the margin to the right
Top Margin • Decrease the value to move the margin down
• Increase the value to move the margin upward.
Selection Effect
Horizontal Adjust • Decrease the value to move the margin to the left
• Increase the value to move the margin to the right
Top Margin • Decrease the value to move the margin down
• Increase the value to move the margin upward.
To Next Page
Loading...
