Lexmark X746de - Page 306

4-16 Service Manual
7526
Go Back
Previous
Next
Left Margin
1. Adjust the left margin until the points of the left alignment marks touch the edge of the page.
• The right arrow increases the value and moves the left side alignment marks to the right.
• The left arrow decreases the value and moves the left side alignment marks to the left.
2. Press Submit to save the value.
3. Print the Quick Test page, and check the left alignment marks each time until you are satisfied.
Right Margin
1. Adjust the right margin until the points of the left alignment marks touch the edge of the page.
• The right arrow increases the value and moves the right side alignment marks to the left.
• The left arrow decreases the value and moves the right side alignment marks to the right.
2. Touch Submit to save the value.
3. Print the Quick Test page, and check the results. Repeat if necessary.
4. When the registration is complete, proceed to the color alignments.
Alignment (cyan, yellow, and magenta)
1.
Touch Back until you reach the top menu, and touch Alignment Menu.
2. Select Cyan.
3. Touch the left or right arrows to set Top Margin to zero.
4. Do the same for Left Margin, Right Margin, Bottom Margin, Skew, and Bow.
5. Touch Submit to enter all the values.
It is important to set all the values to zero before starting.
6. Touch Quick Test in the Cyan menu.