Diagnostic information 2-3
7526
5 Indicator light The two-toned light emitting diode called the indicator light on the operator
panel gives information about the status of the printer using the colors red
and green.
6 Start button • Initiate the current job indicated on the display.
• Start a copy job with the default settings.
Note: The button has no effect if pressed while a job is scanning.
7 Stop button Stops all printer activity.
Note: A list of options is offered once Stopped appears on the display.
8 Home button Return to the home screen.
Note: Pressing the Home button from the Home screen resets all workflow
defaults.
9 Back button • Delete the right-most digit of the value in the Copy Count. The default
value of 1 appears if the entire number is deleted by pressing the button
numerous times.
• Delete the right-most digit of a number entered manually in the Fax
Destination List.
• Delete the character to the left of the cursor in the E-mail Destination List.
If the character is in a shortcut, then the shortcut is deleted.
10 USB port Connect a flash drive into the printer USB port.
Note: Only the front USB port supports flash drives.
Use the To
Indicator light
status
Indicates
Off The printer power is off.
Blinking green The printer is warming up, processing data, or
printing a job.
Solid green The printer is on, but idle.
Solid red Operator intervention is needed.
To Next Page
Loading...
