Lexmark XM3150 - Load [Paper Source] with [Paper Type] [Paper Size] [Paper Orientation]; Load Manual Feeder with [Custom Type Name] [Paper Orientation]; Load Manual Feeder with [Custom String] [Paper Orientation]; Load Manual Feeder with [Paper Size] [Paper Orientation]

Load [paper source] with [paper type] [paper size] [paper orientation]
Try one or more of the following:
• Load the specified tray or feeder with the correct size and type of paper.
• To use the tray or feeder with the correct size and type of paper, touch Finished loading paper on the
printer control panel.
Note: If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds
from that tray or feeder. If the printer cannot
find
a tray or feeder with the correct size and type of
paper, then it prints from the default paper source.
• Cancel the current job.
Load Manual Feeder with [custom type name] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded
to clear the message and continue printing.
• From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [custom string] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded
to clear the message and continue printing.
• From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [paper size] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size of paper.
• From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded
to clear the message and continue printing.
• From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.
Load Manual Feeder with [paper type] [paper size] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded
to clear the message and continue printing.
7016
Diagnostic information
115