8 Remove the E-clip (E), and then remove the MPF sector gear (F).
Reverse solenoid removal
1 Remove the right cover. See “Right cover removal” on page 277.
2 Remove the left cover. See “Left cover removal” on page 264.
3 Remove the rear door and cover. See “Rear exit door removal” on page 342 and “Rear cover removal”
on page 343.
4 Remove the scanner assembly. See “Scanner assembly removal” on page 365.
5 Remove the top cover. See “Top cover removal” on page 351.
6 Remove the cooling fan. See “Cooling fan removal” on page 281.
7 Disconnect cable JDSOL1 from the controller board.
7016
Repair information
273
To Next Page
Loading...
