111 errors
111 error messages
Notes:
• Some error messages are applicable only to printer models with a polygon LSU (laser scanning unit).
• If the sixth digit character assigned to the serial number of the printer is in the P–Z range, then the
printer is installed with a polygon LSU (example: 4514 2ZHH 007CR).
Error code Description Action
111.00 Pel clock check failed. Go to
“Laser scanning unit (LSU) service
check” on page 134.
111.01 Downlevel ASIC detected.
111.20 Mirror motor lock is asserted before the motor is
turned on.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.30 Failed to identify the printhead.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.31 Printhead never delivered HSYNCs.
111.32 Printhead lost HSYNCs.
111.33 Printhead lost HSYNCs during servo.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.34 Mirror motor lost lock.
Note: This is applicable only to printer models
installed with a polygon LSU.
Go to
“Laser scanning unit (LSU) service
check” on page 134.
111.35 Mirror motor was never locked first.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.36 Mirror motor lock was never stabilized.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.37 Page reached input sensor but the mirror motor
was not locked.
Note: This error is applicable only to printer
models installed with a polygon LSU.
111.38 Page reached input sensor but the printhead
startup was not completed.
Note: This error is applicable only to printer
models installed with a polygon LSU.
7016
Diagnostic information
132
To Next Page
Loading...
