Lexmark XM3150 - Insufficient Memory Service Check; Imaging Unit Low Service Check

Insucient memory service check
Action Yes No
Step 1
Disable the Resource save feature:
Settings > Print Settings > Setup Menu > Resource Save > O
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check the memory card for proper installation.
Is it properly installed?
Go to step 3. Reseat the memory
card.
Step 3
a Print the Menu settings page:
Settings > Reports > Menu Settings Page
b POR into the Configuration menu and reset the printer’s
settings to factory default:
Configuration Menu > Factory Defaults > Restore Base
c Remove the memory card.
d Restart the printer.
Does the error remain?
Replace the
controller board. See
“Controller board
removal” on
page 282.
Replace the memory
card.
Imaging unit low service check
Action Yes No
Step 1
Replace the imaging unit.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
a Make sure the imaging unit smart chip contact cable is properly
connected to the controller board.
b Make sure the contacts are free of debris.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Check the contacts for damaged pins.
Are they free of damage?
Contact the next
level of support.
Replace the printer.
7016
Diagnostic information
130