Disable scanner
This menu item is used to disable the MFP scanner if it is malfunctioning. The MFP must be powered o and
on for the new settings to take eect.
To change this setting:
1 Select Disable Scanner from the Configuration menu.
2 Scroll through the setting's other possible values. The values are Enable, Disable, ADF disable.
3 To save the setting's new value, select Submit.
Paper Prompts
This controls which tray a change prompt is directed to when paper is sensed to be the wrong size.
Note: The value of “Action for Prompts” on page 230 may override the value of this setting.
To change this setting:
1 From the
Configuration
menu, navigate to Paper Prompts.
2 Select from the available options:
• Auto (default)
• Multi‑purpose Feeder
• Manual Paper
3 Depending on the printer model, press OK or touch to save the setting, or press X to return to the
Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources
will receive the change prompt. When set to a value other than Auto, the selected source always receives this
type of prompt.
Envelope Prompts
This controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong size.
Note: The value of
“Action for Prompts” on page 230 may override the value of this setting.
To change this setting:
1 From the
Configuration
menu, navigate to Envelope Prompts.
2 Select from the available options:
• Auto (default)
• Multi‑purpose Feeder
• Manual Envelope
3 Depending on the printer model, press OK or touch to save the setting, or press X to return to the
Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources
will receive the change prompt. When set to a value other than Auto, the selected source always receives this
type of prompt.
7016
Service menus
229
To Next Page
Loading...
