Lexmark XM3150 - 201 Paper Jams

201 paper jams
201 paper jam messages
Error code Description Action
201.01 Narrow media sensor is covered during warm up.
Input sensor is not covered.
Go to
“Sensor (narrow media) jam service
check” on page 79.
201.20 Took too long to ramp up auger motor. Go to
“Cartridge gearbox service check” on
page 142.
201.21 Stopped detecting pulses from auger motor's
encoder system.
Go to
“Cartridge gearbox service check” on
page 142.
201.22 Auger motor underspeed error. Go to
“Cartridge gearbox service check” on
page 142.
Sensor (narrow media) jam service check
Action Yes No
Step 1
Check the narrow media sensor for jammed media fragments.
Is the paper path free of partially fed or jammed media?
Go to step 2. Clear the paper path
of any media
fragments.
Step 2
Check the narrow media sensor cable JNRW1 for proper
connection.
Is it properly connected?
Go to step 3. Reseat the cable.
Step 3
POR into the Diagnostics menu and perform a sensor test:
Diagnostics Menu > Base Sensor Test > Narrow Media
Does the sensor state on the control panel display change when
it is toggled?
Go to step 4. Replace the narrow
media sensor.
Step 4
Does the error remain?
Contact the next
level of support.
The problem is
solved.
7016
Diagnostic information
79