Lexmark XM3150 - Page 91

Error code Description Action
244.20 Took too long to ramp up dc feed motor in tray 4. Go to
“Option tray jam service check” on
page 92.
244.21 Pick motor stall in tray 4.
244.22 Tray 4 pick motor underspeed.
244.24 DC Feed ACM stalled on the last pick attempt in
tray 4.
244.32 Tray not ready.
244.33 Pick received but detected a tray pulled.
244.41 Motor 1 (Pick/Lift) Elevator motor stalled.
244.42 Motor 1 (Pick/Lift) Elevator motor PWM overflow
error (underspeed). Motor underspeed (max PWM
and motor underspeed, typical accordion jam).
244.43 Motor 1 (Pick/Lift) motor ramp (end ramp - did not
reach speed, typical pack feed paper jam).
244.44 Motor 2 (Separator/Pass through) motor stalled.
244.45 Motor 2 (Separator/Pass through) motor PWM
overflow error (underspeed). Motor underspeed
(max PWM and motor underspeed, typical
accordion jam).
244.46 Motor 2 (Separator/Pass through) motor ramp
(end ramp - did not reach speed, typical pack feed
paper jam).
244.47 Motor 3 motor stalled.
244.48 Motor 3 motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
244.49 Motor 3 motor ramp (end ramp - did not reach
speed, typical pack feed paper jam).
7016
Diagnostic information
91