Lighthouse a65 - Camera Cycling

24.2Cameracycling
Whenmultiplecamera/videofeedsareavailablethe
cameraapplicationcanbesetuptoautomatically
cyclethroughtheavailablefeedsataspeciedtime
interval.
Withcameracyclingturnedonthecamera
applicationwillcyclethroughtheavailablevideo
input(s)onthedisplayandavailablenetworkedIP
camerafeeds.Thefeedswillbecycledintheorder
theyappearintheCameraselectionmenu:Menu
>Camera.Directvideoinputfeedswillappearrst
andthenanynetworkedIPcamerafeeds.Whenthe
nalfeedinthelisthasbeendisplayedthecamera
applicationwillloopbacktotherstfeedinthelist.
Cameracyclingwillcyclethroughthemultifunction
displaysavailablevideoinput(s)evenifnofeedis
connectedtotheinput(s).Wherenofeedispresent
onavideoinput,duringcyclingthevideoinput
feedwillappearasabluescreen.Youcanchoose
whetherornotthevideoinput(s)appearduring
cameracycling.
Thetimeintervalthateachfeedisdisplayedfor,
beforeswitchingtothenextfeedcanbeadjusted.
Turningoncameracycling
Toturnonthecameracyclingfeaturefollowthe
stepsbelow.
Fromthecameraapplication:
1.SelectMenu.
2.SelectCameraCycling.
3.SelectCameraCyclingsothatOnishighlighted.
SelectingCameraCyclingwillswitchcyclingOn
andOff.
Whenthemenuisclosedthecameraapplicationwill
cyclethroughallavailablefeedsatthedenedtime
interval.
Settingthetimeintervalforcameracycling
Thetimeintervalthateachvideofeedisdisplayed
forcanbesetbyfollowingthestepsbelow.
Fromthecameraapplication,withCameracycling
turnedon:
1.SelectMenu.
2.SelectCameraCycling.
3.SelectCycleinterval.
Thecycleintervalnumericadjustcontrolis
displayed.
4.Adjustthesettingtotherequiredtimeinterval.
Duringcameracyclingeachfeedisdisplayedforthe
timespeciedbeforechangingtothenextfeed.
Showingorhidingvideoinputfeedsduring
cameracycling
Bydefaultyourmultifunctiondisplaysvideoinput(s)
areshownduringcycling,evenifnofeedis
connectedtotheinput(s).Youcanchoosewhether
videoinput(s)appearduringcameracyclingby
followingthestepsbelow.
Fromthecameraapplication:
1.SelectMenu.
2.SelectCameraCycling.
3.SelecttheInclude<CameraName>optionfor
thevideoinputyouwanttoShoworHide.
SelectingInclude<CameraName>optionwill
switchbetweenshowingorhidingthevideoinput
duringcameracycling.
Note:Inthestepsabove<CameraName>
representsthedefaultfeednameprovidedbythe
connecteddeviceorthecustomnamewhichcan
beassignedtothefeed.
Turningoffcameracycling
Youcanturnoffcameracyclingusingthemethods
detailedbelow.
Fromthecameraapplication,withcameracycling
turnedon:
1.SelectMenu>CameraCycling>Camera
CyclingsothatOffishighlighted,or
2.Changethecamera/videofeedmanuallyas
describedearlierinthissection.
Cameraapplication
367