1 - 2 CHAPTER 1 : BASIC NOTIONS
TRYTON 112 CNC
1. STRUCTURE
This manual consists of various chapters, each containing several points, paragraphs, etc.
Lists may be contained in paragraphs.
C The page number is indicated in the top right-hand corner of the page.
C The chapter number and title are indicated in the top left-hand corner of the page.
C The model of the bar feed system is indicated in the bottom right-hand corner of the page.
1.1 Cross-references
Each chapter generally contains all of the information related to the description and settings
of the devices and elements represented therein.
Therefore, if a setting must be made while you are handling the system, please refer to the
chapter on the device to be set, for example: (see chapter *) or (see point *)
1.2 Captions
Whenever possible, the reference numbers contained in the instruction manual are shown
with the LNS ordering number of the indicated element.
To make it easier to place an order of supplies, a form has been included in the annex at the
end of this manual
To Next Page
Loading...
