8 - 2 CHAPTER 8 : OPERATION
TRYTON 112 CNC
1. REMOTE CONTROL
The ergonomic and user-friendly remote control with a clear built-in display facilitates the
handling of the bar feed system. Depending on the sequence under way, the bar feed system
gives access only to those functions which are available, thus avoiding any incorrect
handling, and reducing the access time to the necessary functions.
The display reads, continuously and clearly, the status of the bar feed system and the
production, allowing one to verify at all times the functions, diagnostics, error signals, or
their analysis. The most recent error signals are saved in a register and can be recalled to
establish the diagnostics.
The remote control has five distinct segments, namely: display (A), function keys (B),
numerical keys (C), command keys (E), and the emergency button (D).
To Next Page
Loading...
