CHAPTER 9 : MALFUNCTIONS 9 - 7
TRYTON 112 CNC
2.4 Mechanics
Rotating sleeve
To guarantee perfect operation of the bar-pusher, it is essential that the rotating sleeves
function perfectly. Although they are very robust and reliable in construction, you are
advised periodically to verify that the sleeves turn without rubbing. If a defect should occur,
please contact your local agent.
Retraction cable
If the retraction cable should be damaged, it is possible to replace it. An explanatory note
is delivered with the necessary material.
• Cable for 2 and 3 metre devices: Article No. 112.010.133
• Cable for 12 feet and 4 metre devices: Article No. 112.010.153
3.5 Cleaning
As with any vehicle, machinery, or device, regular cleaning of your bar feed system can only
serve to improve its operation and prolong its useful life.
For cleaning on the outside, use a soft cloth and a regular detergent, for the inside, use a
cloth or a brush. However, make sure that the rollers and parts made of synthetic materials
do not come into contact with these products.
The use of compressed air for cleaning is not advisable, because particles could become
lodged in sensitive areas and impede the proper operation of the bar feed system.
At no time should solvents, such as acetone, or diluents be used for cleaning the
bar feed system. At no time should cleaning products come into contact with
electrical components.
To Next Page
Loading...
