CHAPTER 8 : OPERATION 8 - 7
TRYTON 112 CNC
2. POWERING UP
Please read the safety instructions provided at the beginning of this manual
before handling the following devices.
2.1 Description
When turning on, the states that were in memory at the time of starting up are reviewed
by the programmable automaton which then, by menus that appear on the remote control,
proposes to the operator only those operations that can be effected.
This chapter shows the various functions of the bar feed system and indicates how to
access them.
Given that the handling may vary depending on the status and configuration of the bar
feed system, a standard procedure cannot always be described.
To Next Page
Loading...
