Driving
5.1 Before driving
5 - 2 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
3. On the outriggers
– All outrigger beams must be fully retracted and secured to prevent
extension;
à p. 12 - 32.
– The outrigger pads must be in the driving position;
à p. 12 - 39.
In the case of additional equipment with removable support box:
– The auxiliary supports are retracted;
à p. 6 - 72.
– The electrical and pneumatic connections for driving on the road have
been established;
à p. 6 - 75; à p. 6 - 74.
4. – The mirrors for crane operation are folded in;
à p. 12 - 123.
– The spotlight must be turned downwards (if present);
à p. 11 - 108.
– The lighting on the outrigger must be switched off;
à p. 3 - 62.
5. Anemometer, air traffic control light and camera system are removed;
à Anemometer and air traffic control light, p. 12 - 112.
à Cameras for crane operation, p. 12 - 117
6. All ladders are secured;
à Folding in, p. 4 - 6.
7. The railings are folded in;
à Railings on the turntable, p. 12 - 115.
To Next Page
Loading...
Need help?
General
