Malfunctions in driving mode
7.4 Wheels and tyres
Operating Manual GMK6300L 3 112 xxx en 7 - 13
xx.xx.xxxx
7.4 Wheels and tyres
This section contains all the information about changing a wheel and about
using the tyre inflater connection.
7.4.1 Wheel change
• If a puncture occurs while driving, stop the truck crane, taking the follow-
ing traffic into account, and secure the truck crane as outlined in the appli-
cable legal stipulations of the country in which you are working.
• Select as flat a place as possible to change the wheel.
• Apply the parking brake.
s
G
Risk of accidents due to a wheel falling over!
If you temporarily lean a wheel against the truck crane while changing it,
secure it with a rope to prevent it falling over!
Move the outriggers only when no wheel is leaning against the truck crane.
To Next Page
Loading...
