Operating elements for crane operation
9.2 Short description of the operating elements
Operating Manual GMK6300L 3 112 xxx en 9 - 93
xx.xx.xxxx
9.2.18 Hydraulic system
Inclining the crane cab
In the Settings submenu
Current pressure in bar for movements of the
Critical load control
– Press down: Incline back
– Press up: Incline forward
à p. 11 - 103
1 Telescoping mechanism
2 Slewing gear
3 –Hoist
– Derricking gear
– Counterweight hoist unit
– Incline cab
– Locking units
– To switch on: Press button until the dot (1) turns green
– To switch off: Press button until the dot (1) turns black
à p. 11 - 107
To Next Page
Loading...
Need help?
General
