Driving modes
6.7 Rigging the auxiliary hoist
6 - 96 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
6.7.6 Making/breaking the hydraulic connection
Establishing the connection
The assignment is given by the size and colour
designations.
• Connect the hoses (2) to the connections (1).
Separating the connection
• Remove the hoses (2) from the connec-
tions (1).
• Close all the hoses and connections with the
protective caps.
• Insert the hoses into the hoist frame (3).
S
Risk of damage to hydraulic lines!
Lay the hydraulic hoses so that they will not be damaged during rigging
and crane operation.
To Next Page
Loading...
