Operating elements for crane operation
9.2 Short description of the operating elements
Operating Manual GMK6300L 3 112 xxx en 9 - 95
xx.xx.xxxx
9.2.20 Rated capacity limiter (RCL)
Control unit This section contains the operating elements that are the same for all menus
opened.
Buttons F1 to F14
The function of buttons F1 to F14 is shown on the symbol next to or above
the button. After the button is pressed, the function displayed is executed
provided it has been released.
Error
Opening the Error submenu
The lamp (1) lights up or flashes.
Exiting the submenu/input mode
The lamp (1) lights up.
s
–On: Error has occurred
– Off: No errors
à p. 11 - 39
– Press the button
once:
This opens the
Errors submenu
à p. 14 - 29
– Press the button
once:
– The opened submenu closes – the menu from the
next higher level is opened
– Input mode is deactivated
To Next Page
Loading...
Need help?
General
