Driving modes
6.3 Rigging work for driving with a trailer
6 - 16 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Adjusting axle
pressure
• Tap the button
–(1) to increase the axle pressure,
–(2) to reduce the axle pressure.
The set axle pressure may not exceed 80 bar (1,160 psi).
Driving with
changed axle
pressures
The truck crane may only be driven with changed axle pressures if the main
boom is set down on a trailer (dolly).
Adjusting axle
pressure for
on-road driving
If you would like to drive the truck crane without a trailer (dolly), then you
must adjust the on-road level;
à p. 5 - 17.
To Next Page
Loading...
Need help?
General
