Overview
1.5 Technical data
1 - 18 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Slewing gears
Derricking gear
Main boom
Lattice extension As additional equipment;
à Operating Instructions Lattice Extension.
Make: Siebenhaar
Type: 01 DD
Power unit group M2 (to ISO 4301 - 2)
Cylinder: Differential cylinder
Adjusting angle
(main boom):
-1.5° to + 83° from horizontal position
Power unit group M2 (to ISO 4301 - 2)
Main boom lengths: 15.4 m to 80.0 m (50.5 ft to 262.5 ft)
Main boom head: 9 sheaves
10 sheaves
1)
Cylinder: One single-level telescoping cylinder with
locking/unlocking mechanism
Power unit group
Telescoping mechanism:
M 1 (to ISO 4301 - 2)
1)
Additional equipment
To Next Page
Loading...
Need help?
General
