Malfunctions in driving mode
7.4 Wheels and tyres
7 - 18 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Inflating the tyres The compressed air system's maximum operation pressure of 8 bar
(116 psi) can only be reached with the engine running.
• Start the engine; à p. 4 - 15.
• Fasten the tyre connection (1) to the tyre
valve.
• Press the button on the tyre connection and
inflate the tyre.
• Disconnect the tyre connection (1) from the
tyre valve.
Removing the
filling hose
Before driving, you must remove the filling hose from the filler connection.
• Remove the connection (1) from the filler
connection (2).
• Close the filler connection and the connec-
tion with the caps (3) and (4).
• Stow the filling hose away.
• Drive to a service station or repair shop and
adjust the tyre pressure.
S
Risk of damage to the compressed air system!
Always close the filler connection with the cap.
This prevents damage to the compressed air system and contamination
of it.
To Next Page
Loading...
Need help?
General
