Starting/switching off the engine – for crane operation
10.1 Starting the engine – from the crane cab
Operating Manual GMK6300L 3 112 xxx en 10 - 3
xx.xx.xxxx
9. Check the fuel level and carbamide level if necessary; Ã p. 10 - 4.
10. If the truck crane has a flame start system, wait until the lamp goes out;
à p. 10 - 13.
11. Start the engine;
à Starting the engine, p. 10 - 12.
12. Check the instruments and displays when the engine is running;
à p. 10 - 14.
13. In the event of low outside temperatures;
à CHECKLIST: At low
temperatures
, p. 10 - 4.