Malfunctions during crane operation
14.4 Finding and eliminating malfunctions
14 - 30 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Error message display
For each error the display shows:
– the error code (3),
– the symbols for
– Possibly the error location (1) – the respec-
tive places (2) flash in red.
• Check whether the Error codes tables contain
the error. These tables contain information
on how to remedy errors;
à p. 14 - 31.
Exiting the submenu
You can exit the
Errors submenu at any time.
• Press the button (1) once.
The same menu opens that was open before the
Errors submenu opened.
H
All errors remain saved until you switch off the ignition, even errors that
have since been resolved. All existing errors are treated as new errors and
displayed again after turning on the ignition.
4 the error group
5 the faulty component
6 the error type
To Next Page
Loading...
Need help?
General
