Malfunctions during crane operation
14.7 Other emergency operations
14 - 78 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Performing a jump
start
The socket (1) can also be used to supply power to another vehicle
(with a 24 V on-board network).
• Start the engine for crane operation.
• (A) – Insert the plug (2) into the socket (3) on
the superstructure.
• Connect the cable (1) to the vehicle requiring
the power (24 V).
• Start the engine of the vehicle that requires
the power.
• (B) – Withdraw the plug (2).
• Close the socket (3).
• Remove the cable (1) from the vehicle.
To Next Page
Loading...
Need help?
General
