12 Introduction
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
In order to disconnect the printer quickly from the main power in
the event of an emergency, please note the following:
- For printers connected by a plug, the power-outlet should
be installed near the printer and easily within reach.
- For permanently connected printers, an easily accessible
emergency power-off switch should be installed close to the
printer.
- Please do not conceal the disconnect devices with the printer
or other objects.
- Please follow all the instructions and hints directly attached to
the device and/or described in this manual.
- To ensure optimum printer performance, only use
MICROPLEX consumables.
To Next Page
Loading...
