Microtek ArtixScan 120tf Reference Manual

Reference: The Advanced Image Correction tools 99
Filter tool
The Filter tool is used to apply special effects to your images. Several filters are
provided in ScanWizard Pro TX, including Blur/Blur More, Sharpen/Sharpen
More, Emboss, Edge Enhancement, Gaussian Blur, and Unsharp Masking.
Keep in mind that the appearance of the image in the preview window and how
it is affected by a filter is dependent on the resolution of the image. The higher
the resolution, the less obvious the effect of certain filters (such as Blur).
Choose the filter tool
option you want from
this list box
Choose a custom
made filter
settings from this
list box
Check this box to
apply the filter
effect to the
Lightness “ L”
channel (for LCH
mode only)
Check this box to
ensure that for the
Unsharp Masking filter,
the image displayed in
the preview window
simulates that of the
final scan

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)