Microtek ArtixScan 120tf Reference Manual

Reference: The Preview window 15
Before resizing
After resizing
Zoom In/Out
These commands allow you to magnify (Zoom In) or reduce (Zoom Out) the
prescan or scanned image in the Preview window.
Alternatively, you can use the magnifying glass tool in the Preview
window's Toolbar or use the Handy buttons at the bottom of the
Preview window to accomplish the same effect.
Resize Window to Fit
This command trims an oversized Preview window to fit the prescan image size
under preview to provide more desktop space to display other ScanWizard Pro
TX windows. This is done without affecting the image size.
In the example below, the Preview window at the left is oversized with plenty of
extra idle spaces to its right and bottom. After executing the Resize command
from the View menu, the extra spaces are trimmed and the Preview window is
proportionally resized to accommodate the image size.

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)