Microtek ArtixScan 120tf Reference Manual

Reference: The Preview window 13
Scanner Control
The film scanner provides an energy-saving feature whereby the scanning lamp
switches to power-saving mode when the scanner remains idle for a defined
period of time. It will revert to full power mode as soon as the Overview,
Prescan, or Scan/Batch button is clicked. Aside from saving power, the feature
also helps extend the service life of the lamp and prevents the caking and
deforming of film being scanned due to long period of exposure to lamp heat.
The default idle time to induce the scanning lamp into power-saving mode and
the time needed for the lamp to warm up, revert to full power, and start the
scanning, opeation varies among scanner models. You may define your own idle
and warm-up time intervals or disable the feature altogether by clicking on the
“Scanner Control...” menu command. The following Scanner Control dialog box
will then display to allow you to change the default settings.
Define idle time
interval for Power
Saving mode
to take effect (60
minutes maximum)
Uncheck check
box to disable
Power Saving
feature
Define warm-up time
required for lamp to
revert to full power mode
(Windows)
(Macintosh)

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)