Microtek ArtixScan 120tf Reference Manual

28 Microtek ScanWizard Pro TX for Mac & PC
Inverted imageOriginal
Monitor Gamma
Check this box to enable monitor gamma value setting.
Click the up/down arrow to adjust the gray-level (shading) of the two boxes until
they are equal or they merge into a single shade level. Then click OK to apply.
Invert
This command inverts or creates an effect similar to negative film for all scan
jobs.
Take note that all scan jobs are inverted at the same time; you cannot invert an
individual scan job alone.
When an image is inverted, the brightness value of each pixel is converted to its
inverse value. In the case of 24-bit images, for example, a pixel in a positive
image with a value of 255 is changed to 0, and a pixel with a value of 5 is
changed to 250.
To use this feature:
Choose the Invert command in the Preferences menu. A check mark is shown
before the command when it is enabled.

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)