Microtek ArtixScan 120tf Reference Manual

34 Microtek ScanWizard Pro TX for Mac & PC
WindowsMacintosh
ScanWizard Pro TX. You can always change the rotation anytime during the
scanning session by clicking on the Transform icon in the Settings window.
Scratch Directory (Mac only)
The Scratch Directory is the buffer folder where ScanWizard Pro TX creates and
holds temporary image data file while overviewing, prescanning, and scanning
images. The scratch file is needed only until the current scan ends or
ScanWizard Pro TX is terminated. The file is then deleted.
You should change to a different folder only if the default scratch directory
(where your current ScanWizard Pro TX is located) is located in a disk with
limited space to accommodate scanning operations. To specify a new scratch
directory, choose Other Directory... from the option list.
Thumbnail Size (PC only)
This option allows you to choose between two sizes of thumbnail display in the
Job Panel window during Overview. Sizes available are 96 x 96 pixel (default)
and 128 x 128 pixel.
The Correction Menu
The Correction Menu is an alternative way to access the Advanced Image
Correction (AIC) tools normally available from the Settings window. Note that
corresponding short-cut keys for each tool are also provided in the above menu.
See the section on the Settings window of this manual for the detailed
information of each AIC tool.

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)