Microtek ArtixScan 120tf Reference Manual

26 Microtek ScanWizard Pro TX for Mac & PC
Prescan Setup
The Prescan Setup command lets you set your preferences on how ScanWizard
Pro TX should perform in carrying out prescans of your image. The parameters
you are allowed to control are described below.
Auto Detect Scan Frame (Full Frame Prescan only)
If this box is checked, prescanning will be processed to detect the film frame
containing the image only (slide frame and film unexposed edges are ignored).
Note that this feature will work only if the Prescan button is set at “Full Frame”
mode before clicking the button.
Auto Focus (Mac)/Auto Focus for Prescan (PC)
If this box is checked, the prescan process will include the Auto Focus function
before the actual prescan is carried out. With Auto Focus, the prescanned image
will look clear and sharper. However, this may slow down the prescan process.
Fast Prescan
If this box is checked, the prescan process is accelerated, but the resulting image
is grainier (low resolution). If left unchecked, the resulting image will be of
better quality but the prescan process may slow down a bit.
Keep All Prescan Image(s) After Quit
If this box is checked, all prescanned images from the current session are
retained in the Preview window when you exit ScanWizard Pro TX. The images
will remain available in the Preview window the next time you launch the
program.
(Macintosh) (Windows)

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)