Microtek ArtixScan 120tf Reference Manual

Reference: The Settings Window 53
H. Transform
This lets you rotate the preview image at increments of 90° and flip vertically or
horizontally to achieve a mirror effect.
I. Scanner Profile
This lets you select different ICC scanner profiles for your scan job.
J. Image Category
select predefined adjustments for a specific type of image matching your
original. (e.g., sunsets featuring predominant red and orange hues; portraits with
a preponderance of skin tones, etc.). The image category thus provides a starting
point for optimizing your image.
K. Advanced Image Correction (AIC)
The AIC tools let you adjust and enhance the image with a real-time preview of
the effect applied. The AIC tools available for use will vary, depending on the
color space (LCH or Native mode) chosen in the “More” command (see
Preferences menu of the Preview window).
L. Custom options
These allow you to choose one of the following options for the pertinent AIC
control:
• Select an existing custom settings (if any)
• Create and add a new custom settings
• Revert to the “no correction” status
M. Reset button
This changes settings in all or selected AIC controls to their default values.

Microtek ArtixScan 120tf Specifications

Power

voltage	AC 90V to 264V, 47-63 Hz

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 80%

Scanning Specifications

scanning area	6 x 9 cm Max., 6 x 7 cm, 6 x 6 cm, 6 x 4.5 cm, 25 x 38 mm
resolution optical	4, 000 dpi x 4, 000 dpi
resolution interpolated	16, 000 dpi x 16, 000 dpi

Interfaces

firewire ports	Two
scsi ports	Two
transmission speed firewire	4 Mbytes/s
transmission speed scsi	2 Mbytes/s

Weight and Dimensions

dimensions	19.8" x 10.8" x 5.5" (504 x 274 x 142 mm)
weight	17.6 lb (8 kg)