Miller Nitro 7380 - Cold Temperature Operation

4-OPERATINGINSTRUCTIONS
Coldtemperatureoperation
DANGER
Explosionhazard!
DONOTuseetherstartinguid.Explosion,death,seriouspersonalinjury,orseriousenginedamage
couldoccur.
Failuretocomplywillresultindeathorseriousinjury.
D0085A
Anengineblockheaterisfactoryinstalled.Theelectrical
plugislocatedontheturbosideoftheengine,between
theoillterandywheelhousing,betweentheengineand
theradiator..Preheattheengineusingthisheaterforsev-
eralhourspriortocoldweatherstarting.
Twobatteriesprovide2000ColdCrankingAmps(CCA).
Theengineisequippedwithintakeairheaterstoaidin
coldweatherstarting.
1.Turntheignitionkeytotheonpositionandthepreheat
sequencewillstart.
Thedurationofthepreheatsequencedependsonthe
ambienttemperature.
2.Whenthepresettemperatureisreached,pressthe
startbuttonandcranktheengineuntilitstarts.
NOTE:Thestartbuttonwillnotfunctionuntilthepreset
temperatureisreached.
NOTE:Iftheenginedoesnotstart,repeatthepreheat
process.
3.Donotcrankthestarterformorethan15seconds.
4.Allowthestartertocoolbetweentries.
4-6