Miller Nitro 7380 - Working Operations; General Information; Axle Width Adjust

6-WORKINGOPERATIONS
6-WORKINGOPERATIONS###_6_###
Generalinformation
Axlewidthadjust
Fromthearmrestdisplayrsthomepagetouchthetread
width(manual)icon.Thiswillbringupthescreenwhich
isthetreadwidthscreen.
NOTE:Theiconswillremaingrayedoutuntilmovement
ofthevehiclehasstarted.Theiconswillturntotheap-
propriateinoroutoncemoving.
Fromthisscreenyoucanmovebothsidesinoroutat
thesametime.Theiconswillbegrayedoutindicating
novehiclemovement.WhilemovingslowlytouchtheIN
icon(1)tomovebothsidesinatthesametime.Watch
thetreadwidthindicatordecalontheright-handfrontleg
forwidthvalue.
NOTE:Dimensionsarefromcentertothecenterofthe
tires.
WhilemovingslowlytouchtheOUTicon(2)tomoveboth
sidesoutatthesametime.Watchthetreadwidthindica-
tordecalontheright-handfrontlegforwidthvalueasthe
wheelsmoveout.
NOTE:Dimensionsarefromcentertothecenterofthe
tires.
Touchthehomeicon(3)intheupperright-handcornerto
returntothehomepage.
NOTE:Themachinemustbemoving0.8–8km/h(0.5–
5mph)whileadjustingthetreadwidth.
RAIL18SP00852FA1
RAIL18SP00847FA2
RCPH11SPR010BAM3
6-1