When Nozzle Clogging Cannot Be Solved
4-21
1
1
1
4
Routine Maintenance
13
Press the key to end the setting.
14
Wipe ink adhering to the ink port with a waste
cloth and remove the waste cloth covering the
rail.
15
Press the key.
16
Close the maintenance cover before the carriage and the right lower maintenance
cover of this machine. Then, press the key.
• Cleaning starts automatically. Wait for a while until cleaning has been completed.
17
Press the key several times to end the setting.
• Wipe ink adhering to the ink port. Otherwise, it
may cause the operation defect.
To Next Page
Loading...
