4-24
Check the print condition for which nozzle recovery cannot be performed
Depending on the registered nozzle, there is a mode on which recovery is not reflected. Check the print
condition for which recovery cannot be performed.
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
2
Press to select [CHECK].
3
Press the key.
• The mode for which nozzle recovery is invalid is displayed.
• If there is no mode for which nozzle recovery is invalid, “NONE” is
displayed.
4
Press the key several times to end the setting.
• When there are many registered nozzles, it takes much time to display the checked result.
To Next Page
Loading...
