MIMAKI UJV500-160 - Power Management

ii
Preparing for the Heaters ............................................... 2-28
Changing the Temperature Settings for the Heaters ......2-28
Checking the Heater Temperature .................................2-28
Test Feeding ................................................................... 2-29
Test Printing .................................................................... 2-30
Test Printing ....................................................................2-31
Head Cleaning ................................................................ 2-32
About head cleaning .......................................................2-32
Perform head cleaning
depending on the test printing result ...............................2-32
Set the media feeding ..................................................... 2-34
Setting Feed Correction ..................................................2-34
Correct the ink drop position for bidirectional printing ..... 2-36
Printing Data ................................................................... 2-38
Starting a Printing Operation ..........................................2-38
Stopping a printing operation halfway .............................2-39
Deleting Received Data (Data Clear) .............................2-39
Behavior after printing has been completed ...................2-39
Cutting a media ...............................................................2-41
Chapter 3 Extended Functions
List of Functions ................................................................ 3-2
Setting Heater ................................................................... 3-4
Setting Logical Seek ......................................................... 3-5
Setting Margins ................................................................. 3-6
Setting UV mode ............................................................... 3-7
Adjusting the intensity set in RIP ......................................3-7
Printing at the intensity set in the printer ...........................3-8
Perform setting to reduce stripes between passes ......... 3-13
What is the MAPS Function? ..........................................3-13
Setting MAPS1 Function .................................................3-14
Setting MAPS2 Function (4 color) ..................................3-15
Setting Auto Cleaning ..................................................... 3-18
Setting nozzle face cleaning time ................................... 3-19
Other Settings ................................................................. 3-20
Machine Settings ............................................................ 3-21
Setting a AUTO Power-off ..............................................3-23
Setting the feeding and take up ......................................3-24
Setting the Display of Media Residual ............................3-25
Setting Time ....................................................................3-27
Setting Units ...................................................................3-28
Setting a KEY BUZZER ..................................................3-29
Setting a LANGUAGE .....................................................3-30
Setting a MEDIA DETECT ..............................................3-31
Setting a DRYING FEED ................................................3-32
Setting the amount of blank space between printed lines ...3-33
Set the network ...............................................................3-34
Setting event mail function ..............................................3-36
Setting the Setting Lock function ....................................3-46