iii
Charging ink ....................................................................3-48
Initializing the Settings .....................................................3-50
Confirming Machine Information .....................................3-51
Check the using status of the machine ........................... 3-51
Check the machine version information ......................... 3-52
Displaying the Information of this machine ..................... 3-53
Chapter 4 Maintenance
Maintenance ......................................................................4-2
Precautions for Maintenance ............................................ 4-2
About Cleaning Solution ................................................... 4-2
Cleaning the Exterior Surfaces ......................................... 4-3
Cleaning the Platen .......................................................... 4-3
Cleaning of post heater cover and pre heater cover ........ 4-3
Cleaning the Media Sensor .............................................. 4-4
Cleaning the Media Press ................................................ 4-4
Maintaining the Capping Station .......................................4-5
Cleaning the Wiper and Cap ............................................ 4-5
Washing the Ink Discharge Passage (DISWAY WASH) .. 4-9
When the Machine Is Not Used for a Long Time
(CUSTODY WASH) ........................................................ 4-10
Cleaning the Head and the Area around It ......................4-13
When Nozzle Clogging Cannot Be Solved ......................4-16
Washing of Head nozzle ................................................. 4-16
Fill from the sub-tank to the head with ink ...................... 4-18
If nozzle missing due to color mixture of ink or aeration . 4-19
Alternative nozzles for printing,
when nozzles missing can not be improved ..............................4-22
Automatic Maintenance Function ....................................4-26
Setting the Refreshing Intervals ..................................... 4-26
Setting the Cleaning Intervals ......................................... 4-27
About white ink circulation function ................................ 4-27
Cleaning Y motor .............................................................4-28
Discarding waste ink .......................................................4-29
If a Waste Ink Tank Confirmation Message Appears ..... 4-29
Replacing consumables ..................................................4-31
Replacing the wiper ........................................................ 4-31
Replacing the Cutter Blade ............................................. 4-32
About time to replace lamp ............................................. 4-34
Replacing ink absorption material .................................. 4-36
Replacing the carriage filter ............................................ 4-38
Replacing the mist filter .................................................. 4-40
Replacing the air cleaning filter ...................................... 4-42
Refilling antifreeze mixed water ......................................4-44
Refill antifreeze mixed water .......................................... 4-45
To Next Page
Loading...
