MIMAKI UJV500-160 - Page 53

2-19
1
2
Basic Operations
4
5
6
Setting a Media
About entering media thickness and remaining amount
When you set “Media remaining amount display” and “Media detection” to “ON” and “MANUAL” ( P.3-25,P.3-
31), input screen for the media thickness and the remaining amount is displayed after detecting the media
width.
1
Display the screen for entering media thickness.
• When you set the MEDIA THICKNESS to “AUTO” in the “Media
detection” of the machine setting, this screen is not displayed.
(P.3-31)
2
Press to enter the media thickness (0.1 to
1.0mm).
3
Press the key.
4
Display the screen for entering media remaining amount.
• When you set “Media remaining amount display” of the machine
setting to “OFF”, this screen is not displayed. ( P.3-25)
5
Press to enter the media remaining amount.
6
Press the key.
MEDIA THICKNESS
=0.1mm
MEDIA THICKNESS
=0.1mm
I npu t o f Med i aLengt h
=**.*m
I npu t o f Med i aLengt h
=**.*m