Mindray A7 Operating Instructions

A7™ Operating Instructions 046-004667-00 3 - 39
System Interface Display Tab
Key Click Volume
To adjust the key click volume:
1. Select Setup softkey > Display tab.
2. In the Key Click Volume area, select the +/- buttons to adjust the key click volume.
3. Select the Accept button to confirm the change, or select Cancel to discard the change.
FIGURE 3-46 Display Tab > Key Click Volume Area
Clean Screen
To clean the LCD touch screen:
1. Select Setup softkey > Display tab.
2. Select the Clean Screen button.
The screen locks for 10 seconds for cleaning.
Calibrate Touch
To calibrate the LCD touch screen:
1. Select Setup softkey > Display tab.
2. Select the Calibrate Touch button.
3. Follow the on-screen instructions.
Select the +/- buttons to
adjust key click volume.

Mindray A7 Specifications

General

Type	Anesthesia Workstation
Brand	Mindray
Model	A7
Display	15-inch color touchscreen
Oxygen Flush	Yes
Gas Inlets	O2, N2O, Air
Ventilation Modes	SIMV, PSV
Breathing System	Integrated
Gas Monitoring	O2, CO2, N2O
Monitoring Parameters	FiO2
CO2 Monitoring	Mainstream or Sidestream
Power Supply	100-240 V, 50/60 Hz