Sample Gas Recirculation AG and O2 Concentration Monitoring
8 - 10 046-004667-00 A7™ Operating Instructions
8.10 Sample Gas Recirculation
FIGURE 8-6 Sample Gas Recycling
To return the sample gas to the patient circuit, depress the metal clip and then plug the exhaust tube
to the sample gas return port marked as shown in the above picture.
WARNING: When using the AG module to perform AG measurements on the patients who are
receiving or have recently received anesthetic agents, connect the outlet to the sample
gas return port to prevent the medical staff from breathing in the anesthetic agents.
Metal clip
Exhaust tube
To Next Page
Loading...
