A7™ Operating Instructions 046-004667-00 9 - 5
Product Specifications Physical Specifications
9.3 Physical Specifications
9.4 Stability Configurations and Conditions
Maintains stability when tilted 10 degrees, as required by ANSI/AAMI ES60601-1, clause 9.4.
WARNING: Due to the size and weight of the A7, it should only be moved by
qualified personnel.
WARNING: Excess load may cause a tip hazard while moving the A7. Before
moving, remove all equipment from the top shelf and all monitoring
equipment mounted to the side of the A7. Use care when moving the
A7 up or down inclines, around corners, and across thresholds. Do not
attempt to roll the A7 over hoses, cords, or other obstacles.
Dimensions: Height: 1400 mm ± 25 mm
Width: 1050 mm ± 25 mm (including breathing system)
Depth: 805 mm ± 25 mm
Weight: 185 kg (353 lbs)± 5 kg (with AG module, Auxiliary work
surface and 3 Yokes, without vaporizers and gas cylinders)
Work Surface (stainless steel): Width: 616 mm (26 in) ± 25 mm
Depth: 380 mm (15 in) ± 25 mm
Height: 850 mm (33.5 in) ± 25 mm
Auxiliary work surface Weight limit: 10 kg (22 lbs)
Width: 450 mm +/- 25 mm
Depth: 330 mm +/- 25 mm
Height: 750 mm +/- 25 mm
Top Shelf: Weight Capacity: 40 kg (88 lbs)
Width: 616 mm (26 in) ± 25 mm
Depth: 362 mm (15 in) ± 25 mm
Side Mounting Rails: Supporting weight: 27 kg at a maximum distance of 0.41 m
Bag Arm: Fixed Height Bag Arm:
Length: 312 mm ± 10 mm
Height: 1150 mm ± 10 mm
Swiveling angle: 150 ± 10 degrees
Flexible Bag Arm:
Length: 550mm ± 10mm
The height and angle of the flexible bag arm can be
adjusted freely.
Drawers (internal dimensions): Weight limit: 5 kg (11 lbs)
Drawers are of equal size:
• Height: 135 mm ± 10 mm
• Width: 440 mm ± 10 mm
• Depth: 385 mm ± 10 mm
Casters: Diameter: 15 cm (6 in) ± 2 mm
Brake: central brake with lock/unlock indicator
Cable pusher: cable pusher with each caster
Handle Length: 650 mm ± 25 mm
TABLE 9-3 Physical Specifications
To Next Page
Loading...
