Mindray A7 Operating Instructions

A7™ Operating Instructions 046-004667-00 C - 11
Parameters and Factory Defaults Linked Ventilation Parameter
C.9 Linked Ventilation Parameter
The table below lists how parameter values are affected when changing ventilation modes. For
example, ventilation modes that share the same parameters may also share the same parameter
values when changing from one ventilation mode to the other. Other parameters may have their
values set differently when changing ventilation modes.
CURRENT
VENTILATION MODE &
PARAMETERS
AFFECTED
PREVIOUS VENTILATION MODE
VCV SIMV-VC PCV SIMV-PC PS
VCV Vt —* Measured Vt
or last value
**
Rate —* * **
I:E —* * **
Tpause —* * **
PEEP —* * **
Plimit —* * **
SIMV-VC Vt *—Measured Vt
or last value
**
Rate *—***
Tinsp *—***
Tpause *—***
PEEP *—***
Plimit *—***
PS *—**PS = On
ΔP *—***
Trigger *—***
Tslope *—***
PCV VtG **—**
Pinsp PLAT
or 80% PEAK
or last value
*—**
Rate **—**
I:E **—**
PEEP **—**
PlimVG If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
—If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value
of PlimVG.
If VtG=OFF,
then Pinsp.
If VtG is a
value, then
last value of
PlimVG.
Tslope **—**
* The parameter value is shared between the previous and current ventilation modes.

Mindray A7 Specifications

General

Type	Anesthesia Workstation
Brand	Mindray
Model	A7
Display	15-inch color touchscreen
Oxygen Flush	Yes
Gas Inlets	O2, N2O, Air
Ventilation Modes	SIMV, PSV
Breathing System	Integrated
Gas Monitoring	O2, CO2, N2O
Monitoring Parameters	FiO2
CO2 Monitoring	Mainstream or Sidestream
Power Supply	100-240 V, 50/60 Hz